Past Event

WEBINAR - 1-Day Course on “Offshore Sand Separation: Design, Operation and Maintenance” - Rescheduled from 03 July 2021
Venue: Digital Platform
Date & Time: 27 Nov 2021 (9:00 AM - 5:30 PM) Closed
CPD/PDP: 7
Closing Date Before: 24-Nov-2021 (Subject to change based on availability of seat)
Organised By Technical Division - Oil, Gas and Mining Engineering

SYNOPSYS

In the upstream offshore oil & gas production, effective and efficient sand separation and management are vital, since the presence of sand particles and solids in wellhead production flowlines has the potential to cause erosion and blockage issues in the subsequent downstream equipment at production platforms. As a consequence, dangerous incidents, such as failures of flowlines, production separators, pumps and control valves, have a higher risk of occurring. Moreover, oily sands discharged into the sea are an environmental concern.

In this 1-day course, the participants will learn the engineering design, operation and maintenance of the technologies, such as wellhead desanders, for the removal and cleaning of sand and solids prior to discharge. Proven sand removal technologies, such as wellhead desanders, produced water desanding hydrocyclones, sand fluidizers, and sand cleaning systems are commonly used in the upstream oil & gas production. However, these sand removal and cleaning systems need to be designed and operated correctly to ensure optimized separation performance.

The course will cover the following:

 Equipment Engineering Design Philosophy
    (Principles of operation, desander performance characteristics),
 Package Description
    (Review of all package components, major design and engineering features),
 Equipment Start-up Procedure (Initial start-up/commissioning, normal start-up),
 Normal Operation Procedure (Operating parameters, system monitoring, solids removal),
 Shutdown procedure (Temporary isolation, prolonged shutdown),Troubleshooting and
    maintenance (Routine maintenance, liner removal and replacement).

After completing the course, the participants will be able to understand the importance of offshore sand separation processes and how it can be performed effectively and efficiently during the design, operation and maintenance stages. For more information, you can contact the course trainer via email: johneow@hotmail.com


SPEAKER BIODATA

Ir. Dr. John Eow is a Professional Engineer (BEM) and Chartered Engineer (UK) and, with more than 16 years’ experience in the Oil & Gas industry, having worked with offshore sand separation and management, produced water treatment, crude oil dehydration-desalting, seawater treatment & injection, and gas processing technologies and equipment. He also conduct lectures and training in chemical and process engineering at Singapore Institute of Technology. John obtained his B.Eng in Chemical Engineering (1st Class Hons) and PhD in 1998 and 2002, respectively, from the University of Surrey, UK. His PhD work was on electrostatic water-oil treatment technology. Over the years, he has worked as a technology specialist with oil & gas technology companies, such as Global Process Systems (Malaysia), Keppel Offshore and Marine (Singapore), Cameron Process Systems (Singapore, Japan and Malaysia), and EDES Technology Malaysia. His experiences cover a wide range from Technical and Commercial Proposal to Detailed Engineering to Commissioning to Production Improvement & Troubleshooting for oil & gas processes and technologies. He has also conducted technical training and process improvement work for Saudi ARAMCO, SABIC, PETRONAS, Sarawak SHELL, CNOOC, Murphy Oil Sarawak, Husky Oil Energy, GAIL India, Transwater API, CPOC, Boustead-Salcon Water Solutions, etc. John is also a HAZOP and LOPA study facilitator for oil & gas companies.



Limited to 470 participants only (first come basis) and confirmation email will be sent for successful registration latest by 26 November 2021 @ 5.00 PM


Additional Information
Posted on
 
 
WEBINAR - 1-Day Course on “Offshore Sand Separation: Design, Operation and Maintenance” - Rescheduled from 03 July 2021
Flyer

15-Jul-2021
Download
Post Comment
 
Member Type Normal Rate
(RM)
Online Rate
(RM)
DISTINGUISHED HONORARY FELLOW 225.00 200.00
HONORARY FELLOW 225.00 200.00
FELLOW 225.00 200.00
DISTINGUISHED MEMBER 225.00 200.00
SENIOR MEMBER 225.00 200.00
MEMBER 225.00 200.00
HONORARY MEMBER 225.00 200.00
SENIOR GRADUATE 150.00 125.00
GRADUATE 150.00 125.00
INCORPORATED MEMBER 150.00 125.00
AFFILIATE 150.00 125.00
ASSOCIATE MEMBER 150.00 125.00
STUDENT 90.00 75.00
ENGINEERING TECHNOLOGIST GRADUATE 150.00 125.00
ENGINEERING TECHNICIAN GRADUATE 150.00 125.00
Non IEM Member 540.00 400.00

For IEM members, please CLICK HERE to login for member rate
Rate stated does not include 6% SST




Survey Form


NEWSLETTER

Sign up for our newsletter to receive more information
Name:
 
Email Address:
   

Follow Us